Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
M series phones with the BCM 450
- Thread starter ljclives
- Start date
curlycord
Programmer
Limited support for will be provided M7000 series phones which do not fulfill the minimum release requirements. These
phones may be still used with BCM, but full functionality will not be available. For example, the "Set/System Volume"
feature is not supported on sets which do not fulfill the release requirements. Also the Busy Lamp Field (BLF) will not
work on a M7310 and M7208 phones with production release 15 and lower when installed on a BCM with software
release 3.5 or higher or on a BCM50.
Model______Release required
M7000______ALL_________________European Only
M7100______ALL
M7208______16
M7310______16
M7324______5
M7410______3
=----(((((((((()----=
curlycord
phones may be still used with BCM, but full functionality will not be available. For example, the "Set/System Volume"
feature is not supported on sets which do not fulfill the release requirements. Also the Busy Lamp Field (BLF) will not
work on a M7310 and M7208 phones with production release 15 and lower when installed on a BCM with software
release 3.5 or higher or on a BCM50.
Model______Release required
M7000______ALL_________________European Only
M7100______ALL
M7208______16
M7310______16
M7324______5
M7410______3
=----(((((((((()----=
curlycord
- Status
Similar threads
- Locked
- Question
- Question
- Locked
- Question