jjrinconbayon
Technical User
Hi,
is anyone knows how works and how to configure the lus driver.
Thanks,
Juanjo
is anyone knows how works and how to configure the lus driver.
Thanks,
Juanjo
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Lus driver
- Thread starter jjrinconbayon
- Start date
- Status
Hi,
When you connect your library on the NetWorker server in a SAN environment. You can launch the script
lus_add_fp_devs on the /usr/bin directory; this script will modify entries on the lus.conf (in /usr/kernel/drv) file in order to detect the library by NetWorker.
Look on the lus.conf file, you must see the WWPN.
If none appear, the fibre channel is not correctly installed and/or drivers problems.
You must check that with the luxadm command (-e option).
Thanks,
Best regards,
Marc
When you connect your library on the NetWorker server in a SAN environment. You can launch the script
lus_add_fp_devs on the /usr/bin directory; this script will modify entries on the lus.conf (in /usr/kernel/drv) file in order to detect the library by NetWorker.
Look on the lus.conf file, you must see the WWPN.
If none appear, the fibre channel is not correctly installed and/or drivers problems.
You must check that with the luxadm command (-e option).
Thanks,
Best regards,
Marc
Hi jjrinconbayon! Check out this thread, i posted some info from Legato´s Knowledgebase about the lus.conf there, hope it helps you!
Cheers!
Maverick
Cheers!
Maverick
- Status