Lucent Partner Copying Configuration

[egnalc]

I have a Partner R2 in one location, the customer is moving to another location and we are going to get a new system Partner R4, is there any way to copy the configurations from the R2 system onto the new system R4?

 

[Faffy]

You can not take info from an older release and download it onto a newer release. You might be able to save some money and just flash your old processor up to a R4.

Faffy

 

[drewmich]

EGNALC,

If you had a Partner ACS processor in the original location, you might be anble to do the upgrade like Faffy mentioned, but with the old processor being a P2, it isn't possible.

I also think that you loose all programming on the existing ACS processor when you flash upgrade it to a newer version.

If I am incorrect in that comment ... please advise but be sure you can flash with ALL the upgrades to R5.0. I think that the first upgrade R1.0/1.1 to R2.0 may not overight the existing programming, but I think the later ones do - R3.0/R4/0/R5.0.

Thanks, Andrew Roach
President
Drew Communications
Drew Telecom Group, Inc.
Lucent Voice Mail and Component Repair Specialists
Lucent Telecom Brokers/Resellers
drew@triton.net
616-498-9213

 

[Faffy]

Andy is correct if you don't have a ACS processor you can not upgrade.

But, if you do and you upgrade it will keep all your programming and flash it up.

Faffy