Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Lucent ipsec client version 4.1.206

Status
Not open for further replies.
Jgor

Jgor

IS-IT--Management
Nov 7, 2002
3
IT
The problem is that i've a Pc behind a firewall and it use the NAT (network address traslation) in hide mode; the pc must contact a server by internet, the connection between the pc and the internet server is established but after few minutes the connection drops, because the "keep alive packet" is lost.

Thanks in advance for your help,

Best regards.
 
Status
Not open for further replies.

Similar threads

raist3001
  • Locked
  • Question
Creating an IPSEC VPN tunnel between 2 DLINK DSR-250 help
Replies
0
Views
168
raist3001
raist3001
thopee133
  • Locked
  • Question
received ipsec delete request
Replies
2
Views
386
thopee133
thopee133
KarstenJHilton
  • Locked
  • Question
Cisco RVS4000 IPSec VPN Setup
Replies
0
Views
102
KarstenJHilton
KarstenJHilton
smokey7244521
  • Locked
  • Question
Pix515 VPN Client Connectivity Problem
Replies
0
Views
99
smokey7244521
smokey7244521
hummer3331973
  • Locked
  • Question
What ACL to put on my IPSec L2L VPN to block non VPN traffic
Replies
0
Views
72
hummer3331973
hummer3331973

Part and Inventory Search

Sponsor

Back
Top