Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

LTO-2 Termination

Status
Not open for further replies.
robertedmed

robertedmed

Technical User
May 23, 2005
59
0
0
US
have a adaptec 29160 card in our server and will be installing a LTO-2 Quantum Tape Drive CL1001.using the LVD cable do i need to place the jumper on pins 11,12 to enable terminator power? was told not to do that,install just as it came out of box..LTO-2 drive will be the only thing connected
to the 29160 card....

THANKS in Advance Robert...
 
Status
Not open for further replies.

Similar threads

Maakus
  • Locked
  • Question
Windows 2008R2 unable to locate SATA drives
Replies
1
Views
65
technome
technome
mletendre
  • Locked
  • Question
LTO 2 tape coming up with !6 in LTO 2 drive, runs ok in an LTO 3 Drive
Replies
0
Views
48
mletendre
mletendre
dannyyo
  • Locked
  • Question
When iSCSI SAN box 2 is added to the network
Replies
1
Views
70
iggsterman
iggsterman
mletendre
  • Locked
  • Question
LTO 4 drive cycles Configuring /Not Comunicate
Replies
3
Views
55
TechyG
TechyG
Chris969404
  • Locked
  • Question
Quantum i6K with HP LTO5 attached to AIX/TSM
Replies
0
Views
59
Chris969404
Chris969404

Part and Inventory Search

Sponsor

Back
Top