LSP wont save Translations

[cuauhtemoc]

Good morning,

Im having issue to save translations from main server to LSP, after entering the "save tranlsation LSP" I check the "CM Translation Saved" and it doesnt get saved on int the LSP.

CM Reports as: R016x.02.0.823.0
Main server can se the LSP registed
LSP is configured correctly


Dont know if someone knows what could be causing the issue?

 

[kyle555]

check the time on the LSP. Because its all over SSL, anything that would goof an SSL connection would goof the translations. Time being off by 10 minutes or so would certainly be a particular cause

 

[wpetilli]

Good point about time drift. To ensure the main is pushing you can also try the following:

1) netstat -nac | grep 21874 ---> run this command on LSP ; 21874 is the TCP port for xln push

2) execute SAVE TRANS ALL on main then watch output of above command on LSP; no output means no data



cd /etc/opt/defty ---> to see xln existence and size