Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

LSP installation

Status
Not open for further replies.

ONsiteengineer

Technical User
Jul 17, 2008
414
PH
Hi,

I want to know what are the needed avaya hardware requirements for installing my LSP G350/S8300 PABX at my remote site. Do i need an E1 card?
 
That's all you need as a minimum,the S8300 server and G350 gateway.If you want local trunks, you could connect an analogue line to the gateway trunk port or you could install an MM710 for PRI trunks if required
 
ONsiteengineer,

I think that the s8300/G350 is a good solution. However, this depends on the size of the office. Also, how survivable do you want them to be? Our LSP are fully self sustaining. We have both POTS and T1 in each office. I also make use of these local services by routing calls from central office through these "Local" services. Free calls are always a good thing...


“Do not spoil what you have by desiring what you have not; remember that what you now have was once among the things you only hoped for.”

- Epicurus
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top