LSP filesync fails

[josephr123]

I have an LSP that was recently installed and the translations were saved on the initial install but has failed every night since. Tha sw versions are different but i thought the LSP could be higher than the main server. I can sftp to the LSP and the network stuff all looks good. I have 4 other LSP's that are working fine but have 3.1.2 and 3.1.3 sw. just the 3.1.4 doesn't work. Any thoughts. Here are the sw versions
@Chelsea8300> swversion
Operating system: Linux 2.6.11-AV18 i686 i686
Built: Mar 9 15:26 2007

Contains: 01.4.642.1
Reports as: R013x.01.4.642.1
Release String: S8300-013-01.4.642.1
UPDATES:
01.4.642.1-14809 activated hot Daylight Saving Update (2007
h-1)
01.4.642.1-14881 activated cold patch 14881 for 01.4.642.1
01.4.642.1-15179 activated hot Medium risk pcre security up
date
dadmin@Chelsea8700a> swversion
Operating system: Linux 2.4.20-AV15 i686 i686
Built: Mar 15 09:42 2005

Contains: 00.1.346.0
Reports as: R013x.00.1.346.0
Release String: S8700-013-00.1.346.0
UPDATES:
00.1.346.0-10986 unpacked hot SP 10986
00.1.346.0-12514 activated hot Daylight Savings Update
00.1.346.0-11153 activated hot SP 10986 + backup fixes


Translation Saved: Apr 25 11:34

License Installed: Jan 31 2007
dadmin@Chelsea8700a> swversion
Operating system: Linux 2.4.20-AV15 i686 i686
Built: Mar 15 09:42 2005

Contains: 00.1.346.0
Reports as: R013x.00.1.346.0
Release String: S8700-013-00.1.346.0
UPDATES:
00.1.346.0-10986 unpacked hot SP 10986
00.1.346.0-12514 activated hot Daylight Savings Update
00.1.346.0-11153 activated hot SP 10986 + backup fixes

 

[definityandcmuk]

go onto the LSP web page and configure server - check you have the file synchronisation entry configured correctly

List survivable - is the LSP showing as registered?

 

[josephr123]

The IP addresses are correct in configure server and the LSP shows in service/idle it is a CM 3.0.1 in the main server so list survivable is not valid command.

 

[Mitch672]

it would be "display lsp" on the older version of CM3.

You should probably consider upgrading your main server to CM 3.1.4, if you can get all of the LSPs updated first.

AVAYA has made the ISO of CM 3.1.4 available to download, and then you can burn your own CD...

mitch


AVAYA Certified Specialist