LSP active or standby mode

[avayabrain]

I have a remote site remote to hub site. It is LSP , i need to find out if it is in LSP active mode or LSP standby mode. what command i run and shall irun it on hub site or local LSP?

CM 5.x ,s8720, LSP - 8300

 

[SF0751]

At the hub site, use the command "list surv". Check the column "LSP Active".

Susan
"An education isn't how much you have committed to memory, or even how much you know. It's being able to differentiate between what you do know and what you don't."
- Anatole France

 

[avayabrain]

Thanks,

is see lsp is not active when i do "list sur"

but when i check server status on 8300 webpage it says "active"

pls clarify...

 

[ip22222]

based on your "list sur" results, the LSP is not the active server. Another way to check is to log into the gateway of the LSP and do "show mgc". It will show the IP address of the Active Controller.

 

[AvayaTier3]

can you login to CM on the LSP... Try to save translations.
Also observer the splash screen when you go to SAT.
* Local Survivable Processor (LSP) - Translations cannot be saved *

list configuration all will show circuit-packs
if they show no board, then it's not active.

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

http://bshtele.com