LS Paging on the 2K

[MitelInMyBlood]

Does anyone recall if there are any specific switch settings for the E&M (MC342) trunk card for Loudspeaker Paging?

I have it installed and working, but when paging via an intermachine call (going across CEPT) the E&M paging trunk is not releasing at the end of the page.

System: SX2K
LW 34 (34.2.7.4)
Page is initiated by an external adjunct tied to a T1-PRI
Page routes intermachine across E1 CEPT trunks to an end node (also 2K)
Using Loudspeaker Paging Zone 2
E&M trunk (MC342AA)
Using feature access code for LS paging + the zone # in the dial string.
ARS is there to allow the call to get to the paging trunk.
Pages work
Initiating trunk releases
Intermachine trunks release
Paging trunk is not releasing

Ideas?
Thanks!!!!!!!!

 

[MitelInMyBlood]

Never mind, found it
Both switches down.
(something to be said for keeping the old SG hardcopy books)

 

[kwbMitel]

Are you able to give yourself a star?

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[MitelInMyBlood]

You remember "Hazel" the housekeeper from The Brady Bunch? We have our very own "Hazel" around here, one of the jr. techs, who delights in working in a spotlessly clean, precisely organized shop. The guy is festidiour to the point of being a pest. "Clean Shop is a Happy Shop" - This Bozo has fought me for years about wanting to throw away the old hardcopy SG, S, VS and SX50 manuals. Dunno if you've ever seen a complete set of 'SG' printed documentation but the stack of five big 3-ring binders and two more binders full of school notes rivals that of the old Western Union (Siemens-Halske) TWK-4D Telex/TWX dial teletype switch. They are a priceless library of SX2K knowledge taken virtually down to the buss level. Granted there's little need to refer to them anymore, but when you're digging for something obscure you can generally find it.