Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

lquerypr flags 1

Status
Not open for further replies.
andy61

andy61

Technical User
Apr 19, 2006
59
GB
I can't find any man pages for lquerypr. We recently had an HACMP (4.5, AIX 5.1) failover and the hacmp.out shows disks reserved by a different node. It then runs lquerypr -v -V -p -h /dev/vpath?. Does anyone know the meanings of the flags ? Does one of them reset the reserve ?
 
Sort by date Sort by votes
From the "Subsystem Device Driver User's Guide":

lquerypr command

Flags

–p If the persistent reservation key on the device is different from the current host reservation key, it preempts the persistent reservation key on the device.

–c If there is a persistent reservation key on the device, it removes any persistent reservation and clears all reservation key registration on the device.

–r Removes the persistent reservation key on the device made by this host.

–v Displays the persistent reservation key if it exists on the device.

–V Verbose mode. Prints detailed message.



Regards,
Chuck
 
Upvote 0 Downvote
See the SDD user's Guide (ftp://ftp.software.ibm.com/storage/subsystem/UG/1.6.2.x/f2bsdu07_English_version.pdf), you should find a short man page on lquerypr in there. Failing that, just google for lquerypr to find more info.



HTH,

p5wizard
 
Upvote 0 Downvote
Thanks for this the link is just what I needed. Google didn't turn up what I wanted !
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

unixfreak
  • Locked
  • Question
Route flags in ODM 1
Replies
3
Views
183
unixfreak
unixfreak
gatetec
  • Locked
  • Question
mklv command flags 1
Replies
5
Views
97
p5wizard
p5wizard

Part and Inventory Search

Sponsor

Back
Top