Guest_imported
New member
- Jan 1, 1970
- 0
Can the Transmit Levels be adjusted in system programing
on a Norstar MICS 0 x 32 ?
on a Norstar MICS 0 x 32 ?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Low Transmit Volume
- Thread starter Guest_imported
- Start date
- Status
if you are talking about line volume, there is a feature called loss package where you can adjust the trunks for distance from the CO, i think it is short, medium, long and PBX. I had a customer with static on the line and put all ines to medium loss package, static gone.
poke around in the lines section, i don't remember where exactly but it is called loss package
poke around in the lines section, i don't remember where exactly but it is called loss package
jerryreeve
Vendor
the programming area you are refering to is LINES->Trunk/Line Data->LossPkg: JerryReeve
Communications Systems Int'l
com-sys.com
Communications Systems Int'l
com-sys.com
- Status
Similar threads
- Locked
- Question