Loudspeaker paging use and configuration.

[T8keiteasy]

I have to connect an external paging system to an AMB on Cxi (R8.0);

Hi,

I don't have the external system now, but I'm trying to understand how it works.

I have declared a FAC
No interconnection programmation
Loudspeaker Paging Assignment has been done, zone number 1

In COS, pager access is allowed...

The system has been rebooted.

When I call the FAC number, the system answer forbidden.

Do I need to have the external system connected ?
Is this external system behaving as an analog line ?
To declare several zones, I guess I need to have several paging connector (trhu ASU II for example) , right ?

Thank you

Now, it's about French users too !!!

 

[kwbMitel]

Two possibilities occur to me.

1 - the page zone requires 2 digits (maybe not cant remember)

2 - If you are testing without picking up the handset it won't work. (I've been guilty of this too many times to count)

Number 2 is a definite slap your head moment.




*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[T8keiteasy]

Hi,

kwbMitel always on top !!!
I have been looking the way to let it work for days !!!!
As you said, I needed just to pick up the phone to let it work!!!


Damned...sometines I wonder what MITEL's guy are doing ?
Is there a good reason ? (maybe for speaker reason...)

Thank you

Now, it's about French users too !!!

 

[Lundah]

This one gets everyone. My guess as to why would be to reduce the possbility of feedback. Imagine a user seated beneath a loudspeaker, then using their speakerphone to page; the feedback squeal would leave everyone's ears ringing for a bit.

 

[Webmany]

What did you use for the bay/circuit/slot?

 

[kwbMitel]

WebMany,

You should start your own threads to ask new questions.

That being said, By default the PLID is 4-1-4-1 (found in technicians handbook)

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.