Loudspeaker Paging - CX

[mitelmitel]

Hi,

Does anyone know what the pin out for loudspeaker paging on the CX is?

Or better still what colour wires on the CX Analog Cable I need to use?

I am connecting it into the Microphone input of a PA system.

Thanks!

 

[mitelmitel]

I think I found some documentation on this:

Pin
3 - Paging Signal
4 - Paging Signal
6 - Not used
2 - Paging Relay Common
5 - Paging Relay Normally Open
1 - Paging Relay Normally Closed.


So... would I simply snip the cable coming from the 3300 Paging port and connect pins 3&4 to the Microphone cable audio input pins A&B?

Thanks,

Chris.

 

[mitelmitel]

Worked a treat I used PINs 3+4 and connected them the the PA system.