Loudspeaker page button

[chazfraz]

How can I program a loudspeaker page button onto my mlx phones. Using Legend 7 V9.0
Can program group page fine. I can also page over the loudspeakers if I use the feature button and then enter page number but would like it to be on a programmed button.
Thanks

 

[MattWray]

I may be wrong, its been a long time and I don't have a phone in front of me.. I think you just need to set it up from the console. System progam-> AuxEquip-> Ldspkr Pg-> trunk # (801, etc)-> Enter-> You may have already done this as you have LP already working, I can't remember if you need this to set it up. Maybe try programming the line you have LP on to a button.. Matt Wray
CCNA, MCP
mwray77518@yahoo.com

 

[ttech]

You go into Extentions -> Lines and Trunks and program the Trunk Associaed to the Paging Adapter to each Phone after you assign What trunk The paging is hooked to using the procedure Matt outlined above

Don

 

[ken07734]

Actually, once you program the paging port in aux equip. you need to put a loudspeaker page button on the phones. that is done thru centralized programming. just look at the options, it's there. you can also use #9 and the trunk number if using a single line phone.