Loud Speaker/Phone Paging

[KurtDuncan]

Does anyone know how to do a loudspeaker and all speaker phone page at 1 time?

We can get one or the other but not both.

Thank You.

 

[merlinman]

The last time I checked on this, it required a "SPECIAL ASSSEMBLY" from AVAYA's Special Assembly group.

As I reacall, it was a COMCODED (starting with an 8 or 9) device.

 

[TouchToneTommy]

Need to go to a Magix R3 to get that feature built in.

 

[merlinman]

TTT is SO CORRECT, as usual.

In Magix 2.2 and above, you can include 2 PAGING LINE PORTS in the 799 (PAGE ALL) group.

Thanx, TTT, I spaced that one out....

 

[Papagigo]

This may seem a bit unusual, but it does work in a pinch! I took a old MLX-10 (base only) and wall mounted it near the paging amp. I removed the switch hook assembly, cut off the the wires to the internal speaker and used them as the paging amp feed!

Mike Higgins

 

[rkochis]

Papagigo,
Just how sneaky can you get? Nice stinking bandaid!! We who are unworthy salute you!

 

[merlinman]

Actually, that is how the AVAYA "CUSTOM ENGINEERING" group did it before R2.0.

Again, TTT's answer is the best.

R3 Allows this functionality.

Do you need a Processor???