Lost VM trying to enable ring up

[FishDick]

I was trying to change the phone so that when I was on key 0 and got an incoming call it would ring up to key 01. That doesn't work and now I have no VM.

Can someone point me in the right direction. Has it got to do with MARP?


TN 7 6
DATE
PAGE
DES

DES SWITCH
TN 007 0 00 06
TYPE 2008
CDEN 8D
CUST 0
FDN 3150
TGAR 7
LDN NO
NCOS 7
SGRP 0
RNPG 52
SCI 0
SSU
LNRS 16
XLST
CLS UNR FBD WTA LPR PUA MTD FND HTD TDD HFA
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUA DPUD DNDA CFXD ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AHD
DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3
CPND_LANG ENG
RCO 0
HUNT 3150
LHK 3
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 1552 0 MARP
CPND
NAME Chuck S
XPLN 27
DISPLAY_FMT FIRST,LAST
01 SCR 1652 0 MARP
02 TRN
03 AO6
04 SCN 1555 0
CPND
NAME IS Help Desk
XPLN 27
DISPLAY_FMT FIRST,LAST
05 CFW 10
06
07
DATE 17 FEB 2006


NACT

 

[Nortellian]

you need cls settings of fna and hta

 

[FishDick]

That did it.

Thanks for the quick reply!

 

[morgansdad]

Hunt 000 will cause the call to roll up the key strip trying every key until you reach key 3 and then on to 3150.

 

[acewarlock]

Also chg LHK 1, you have it set to hunt to TRN and AO6.

 

[morgansdad]

I believe that it will actually HUNT to the first feature key it reaches, so LHK is not an issue.

 

[johnpoole]

lhk takes precedence over hunt.. i have my set hunt to mail, but lhk to key 1.. before i fna to mail..

john poole
bellsouth business
columbia,sc