Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Lost View on all TCP/IP Printer Ports in Win 2K

Status
Not open for further replies.
Larryrs

Larryrs

IS-IT--Management
Apr 6, 2005
1
US
I've never seen this happen before so I'm hoping someone here has a remedy. I used the "AXIS" un-install utility to remove a port for a Canon printer yesterday. Afterwards, all the visable TCP/IP printer ports plus everything that usually shows in the 'PORTS' tab dissapeared. The ports are still there becasue all of our 150+ printers are working just fine. I just cannot see them any longer. Is there a way to rebuild/refresh that listing to populate those entries back into my server? I have already done a re-boot....The only thing left for me to do is a restore from last backup if you don't have a solution.

Thanks,
 
Status
Not open for further replies.

Similar threads

sysmatics
  • Question
Initialize a printer after printing a page
Replies
2
Views
870
sysmatics
sysmatics
vgulielmus
  • Locked
  • Question
Shared printer connected via USB
Replies
4
Views
1K
vgulielmus
vgulielmus
S
  • Locked
  • Question
Sharp BP-50C55 printer User Authentication box
Replies
0
Views
424
SMS1295
S
R
  • Locked
  • Question
2 users in the same office using 2 different printers both have"GET /eSCL/ScannerStatus HTTP/1.1 Host: localhost:" printed on the top of every paper t
Replies
1
Views
486
DrB0b
DrB0b
T
  • Locked
  • Question
Paper jam on HP 4050N
Replies
1
Views
283
DrB0b
DrB0b

Part and Inventory Search

Sponsor

Back
Top