I have 2 SCSI cards installed in V480, and each SCSI connects to a S1 in which the root disks are located, after power outage, I lost connection to disks in both S1
probe-scsi-all does not show the SCSI cards
boot cdrom -s and cfgadm -al only shows the c0 scsi-bus and the cd-rom
The SCSI cards and cables are still connected. Is that a hardware or software failure, any suggesion on how can I recover?
Thanks
probe-scsi-all does not show the SCSI cards
boot cdrom -s and cfgadm -al only shows the c0 scsi-bus and the cd-rom
The SCSI cards and cables are still connected. Is that a hardware or software failure, any suggesion on how can I recover?
Thanks