lost password of lucent ap600

[koshu]

Hi, group
Somebody in my lucent ap600 hundred has deleted the snmp table
now if i telnet to the router the router is not authenticating the user .Is there any way to break into that router.Or reset to factory default

Plz help me
Thanx
Kaushalender

 

[pthegreat]

The AP600 replaced the AP450. I had the same problem on a 450 ones. You have to connect a terminal(emulator) to the serial port with the console cable. recycle the AP and during boot you can break into the boot prompt, with I believe a Control-C. But it'll show you the message. once in a boot> prompt you can reset to defaults. which resets the username to "admin" with no password.
I don't remember the actual command. but a "?" will probably give you the available boot> commands.

regards,
peter
pfischer@atmit.com