I added an 016MLX card to Legend yesterday. Had shutdown Audix while Legend was down as suggested in docs. Audix refused to boot back up. Replaced with backup box and restored with tape backup. All seems to be running fine, but now on remote PC and WinSPM, when clicking on PassThru there is no response. Had been working ok for years. The Audix terminal has access to Legend, so believe comm is ok between. Any ideas??
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Lost PassThru to Audix
- Thread starter BobbR
- Start date
- Thread starter
- #3
Success!
Rebooted Legend yesterday but no joy.
This morning rebooted Audix and regained access via PassThru.
For whatever reason, could initiate communication from Audix to Legend but not other way. Now all is normal. Looks like this will be a good day.![[bigsmile]](/data/assets/smilies/bigsmile.gif "[bigsmile] [bigsmile]")
Rebooted Legend yesterday but no joy.
This morning rebooted Audix and regained access via PassThru.
For whatever reason, could initiate communication from Audix to Legend but not other way. Now all is normal. Looks like this will be a good day.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question