OzzieGeorge
Programmer
I thought it would be good to start a thread to document commands that have either never been documented of have been lost in the mists of time. I will kick this off with an example of each, feel free to add to the list. Once we have enough I'll turn this into an FAQ
Lost Cmd EBX
When X = 0 it displays the connection status of a trunk and you can forcibly release it by CCC ing it.
When X = 2 It does the same for a station.
note this can take about 30 seconds to occur after the exe. It also has the added benefit of resetting the port back to a base line which can also clear oddball faults.
Undocumented Cmd 83 de 3 de 1 exe
This can be used on the IPS to activate newly loaded options, doing away with the need to do a reset.
So now it's over to you guys, what do you have up your sleeve????
Lost Cmd EBX
When X = 0 it displays the connection status of a trunk and you can forcibly release it by CCC ing it.
When X = 2 It does the same for a station.
note this can take about 30 seconds to occur after the exe. It also has the added benefit of resetting the port back to a base line which can also clear oddball faults.
Undocumented Cmd 83 de 3 de 1 exe
This can be used on the IPS to activate newly loaded options, doing away with the need to do a reset.
So now it's over to you guys, what do you have up your sleeve????