Hi
I run a small Engineering group with 4 CAD stations connected by LAN to an Ether Hub, it worked great until I had to reformat a hardisk.
Three machines have a Simplenet EthenetSN200 network card. Two are plug n play one is not. I reformatted Sta #9 one of the PNP units and reinstalled the driver. Now it will not communicate with either of the other 2 stations #3 and #8 with similar cards.
A 4th station #10 has a 3ComFast SN200 card, it communicates with everybody and everybody with it.
What is going on, how can I get all to talk with each other again?
I run a small Engineering group with 4 CAD stations connected by LAN to an Ether Hub, it worked great until I had to reformat a hardisk.
Three machines have a Simplenet EthenetSN200 network card. Two are plug n play one is not. I reformatted Sta #9 one of the PNP units and reinstalled the driver. Now it will not communicate with either of the other 2 stations #3 and #8 with similar cards.
A 4th station #10 has a 3ComFast SN200 card, it communicates with everybody and everybody with it.
What is going on, how can I get all to talk with each other again?