Loss of signal on confrence

[jerryreeve]

I have a customer who is experienceing a pretty serious loss of volume between the legs of a confrence (feature 3) I tried changing the loss package from the default med CO to the other options long co short pbx and long pbx; didn't try short CO though. and the two legs said that their receive volume from the other leg was about the same on each of our tries.

does anybody remember seeing this problem on their systems? or have any suggestions on how to amp up the signal in the norstar?

thanks


JerryReeve
Communications Systems Int'l
com-sys.com

 

[luv2ski]

Yes all the time i tell customer if they are using a t1 for 1 leg its usually works fine both legs t1 always good...2 copper legs if your real lucky maybe but dont hold breath..i have had telco out and they are always within spec for db loss if 1 leg is up towards top of scale forget it you have db loss in db loss out and the ksu is allowed a db loss

Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com

Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.

 

[jerryreeve]

thanks pat, I kinda figgured that there was no help for this but I had to ask.

JerryReeve
Communications Systems Int'l
com-sys.com