Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Looping my intro
- Thread starter ricardi
- Start date
How is it playing? Did you drag it in to the Sound channell or call it by Lingo? If it's checked to loop AND you called it by Lingo it should be fine but if you dragged it to the Sound Channell then you need to make sure that it is checked to loop AND stretched the full length of your timeline.
Cheers~Frank
Cheers~Frank
- Thread starter
- #3
sorry i dont really use director that much...No problem, just use this code on a frame script:
on exitFrame me
sound(1).play(member("yoursoundname"))
end
*This will play it in sound channell 1. If you're going to have any narration etc. you may want to change the (1) to (2) and then put your narrations etc. in (1). If you drag sounds you can only use 2 sound channels but if you call them by Lingo you can use up to 8.
Cheers~Frank
on exitFrame me
sound(1).play(member("yoursoundname"))
end
*This will play it in sound channell 1. If you're going to have any narration etc. you may want to change the (1) to (2) and then put your narrations etc. in (1). If you drag sounds you can only use 2 sound channels but if you call them by Lingo you can use up to 8.
Cheers~Frank
- Status
Similar threads
