Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Loop start lines auto-terminated to CallPilot fax mailboxes

Status
Not open for further replies.
Steveb1268

Steveb1268

Systems Engineer
Aug 9, 2019
1
CA
Hey Guys and Gals. I'm in a situation where I need to temporarily auto-terminate some loop start lines directly to fax mailboxes on CallPilot. I have a CS1000e RLS 7.65 with an XUT. My question is this...I know I have to set SUPN (Supervision) to Yes, but what STYP should I be using (BST, PIP, etc.)? I recall from years ago that auto-terminating loop start lines didn't work very well as the lines went into lockout at times. Not sure if that's still the case today or not.
 
Status
Not open for further replies.

Similar threads

Trason
  • Question
e911 on rls 7 where to start
Replies
2
Views
310
bignose21
bignose21
bltodd
  • Locked
  • Question
ERR008 Digital and Analog Calls in Hang up after initial connection. Calls to outside hangup Fax too
Replies
0
Views
113
bltodd
bltodd
Michael.D
  • Locked
  • Question
CS1000 - Auto attendent/VM 1
Replies
3
Views
111
Firebird Scrambler
Firebird Scrambler
Rosesam
  • Locked
  • Question
Callpilot 200I questions
Replies
3
Views
128
Rosesam
Rosesam
VRRyan
  • Locked
  • Question
Nortel CallPilot 201i
Replies
4
Views
143
joe_z
joe_z

Part and Inventory Search

Sponsor

Back
Top