Loop delete 1

[Qamar177]

Hi everyone,
I am Qamar from Pakistan.
I want to delete loop, loop 9 is configured on meridian 11c main cabinet slot no 9, but I want to configure an ALC card at this position. I have deleted concern Route,DCH and MSDL but unable to delete loop 9. When I take "inv prt cards" in LD 117 this slot shows PRI2. I tried to delete LPTI in LD 73 but failed. Please guide me.

 

[Firebird Scrambler]

Go into LD 22 and key in CEQU
My guess is that you have PRI or DDCS = 9

Then go into LD 17 under CEQU and when you get to the required area to key in X9 etc.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.myfreesites.net

linkedin

 

[Qamar177]

I did so in LD 17, now in LD 117 slot no 9 is empty. I want to configure it for ALC but unable to generate inventory. Guide me

 

[Firebird Scrambler]

What card is an "ALC" ?. Do you mean a "FALC"?

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.myfreesites.net

linkedin

 

[bignose21]

if you mean analogue line card then just start configuring phones on the TN's 9 0, 9 1, etc.