Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Loop / Circuit

Status
Not open for further replies.
BK5426

BK5426

Technical User
Jun 19, 2013
35
US
Hello All,
Rookie status here however willing to learn. My question is I have 10 Loops (posted below) I can see three are tie. I have 5 PRI that carrier is saying are in no truck group all DID's run across all circuits. We are disconnecting 2 circuits so i guess if they are correct this will have no impact on any of my loops correct? my questions are as follows
1. Is there a LD i can view to see if a PRI is direct connect to a loop?
2. Is there anything i should do when they disconnect?
3. Will I see an alarm like i lost PRI?
4. Should i disable or disconnect anything?
5. Does this sound like common procedure? any pre maintance i need to do?
I want to try and learn and understand the switch better so i apoligize in advance for any foolish blunders. Thanks

PRI* TRK LOOP 12 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE TIE 3VCE * CH 02 - IDLE TIE 3VCE *
CH 03 - IDLE TIE 3VCE * CH 04 - IDLE TIE 3VCE *
CH 05 - IDLE TIE 3VCE * CH 06 - IDLE TIE 3VCE *
CH 07 - IDLE TIE 3VCE * CH 08 - IDLE TIE 3VCE *
CH 09 - IDLE TIE 3VCE * CH 10 - IDLE TIE 3VCE *
CH 11 - IDLE TIE 3VCE * CH 12 - IDLE TIE 3VCE *
CH 13 - IDLE TIE 3VCE * CH 14 - IDLE TIE 3VCE *
CH 15 - BUSY TIE 3VCE * CH 16 - IDLE TIE 3VCE *
CH 17 - IDLE TIE 3VCE * CH 18 - IDLE TIE 3VCE *
CH 19 - BUSY TIE 3VCE * CH 20 - IDLE TIE 3VCE *
CH 21 - BUSY TIE 3VCE * CH 22 - IDLE TIE 3VCE *
CH 23 - IDLE TIE 3VCE * CH 24 - DCH 12

PRI* TRK LOOP 13 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - MBSY TIE 3VCE * CH 02 - MBSY TIE 3VCE *
CH 03 - MBSY TIE 3VCE * CH 04 - MBSY TIE 3VCE *
CH 05 - MBSY TIE 3VCE * CH 06 - MBSY TIE 3VCE *
CH 07 - MBSY TIE 3VCE * CH 08 - MBSY TIE 3VCE *
CH 09 - MBSY TIE 3VCE * CH 10 - MBSY TIE 3VCE *
CH 11 - MBSY TIE 3VCE * CH 12 - MBSY TIE 3VCE *
CH 13 - MBSY TIE 3VCE * CH 14 - MBSY TIE 3VCE *
CH 15 - MBSY TIE 3VCE * CH 16 - MBSY TIE 3VCE *
CH 17 - MBSY TIE 3VCE * CH 18 - MBSY TIE 3VCE *
CH 19 - MBSY TIE 3VCE * CH 20 - MBSY TIE 3VCE *
CH 21 - MBSY TIE 3VCE * CH 22 - MBSY TIE 3VCE *
CH 23 - MBSY TIE 3VCE * CH 24 - BKUP DCH 13

PRI* TRK LOOP 14 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - MBSY TIE 3VCE * CH 02 - MBSY TIE 3VCE *
CH 03 - MBSY TIE 3VCE * CH 04 - MBSY TIE 3VCE *
CH 05 - MBSY TIE 3VCE * CH 06 - MBSY TIE 3VCE *
CH 07 - MBSY TIE 3VCE * CH 08 - MBSY TIE 3VCE *
CH 09 - MBSY TIE 3VCE * CH 10 - MBSY TIE 3VCE *
CH 11 - MBSY TIE 3VCE * CH 12 - MBSY TIE 3VCE *
CH 13 - MBSY TIE 3VCE * CH 14 - MBSY TIE 3VCE *
CH 15 - MBSY TIE 3VCE * CH 16 - MBSY TIE 3VCE *
CH 17 - MBSY TIE 3VCE * CH 18 - MBSY TIE 3VCE *
CH 19 - MBSY TIE 3VCE * CH 20 - MBSY TIE 3VCE *
CH 21 - MBSY TIE 3VCE * CH 22 - BUSY TIE 3VCE *
CH 23 - IDLE TIE 3VCE * CH 24 - BUSY TIE 3VCE *

PRI* TRK LOOP 15 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE DID VOD * CH 02 - IDLE DID VOD *
CH 03 - IDLE DID VOD * CH 04 - IDLE DID VOD *
CH 05 - IDLE DID VOD * CH 06 - IDLE DID VOD *
CH 07 - IDLE DID VOD * CH 08 - IDLE DID VOD *
CH 09 - IDLE DID VOD * CH 10 - IDLE DID VOD *
CH 11 - IDLE DID VOD * CH 12 - IDLE DID VOD *
CH 13 - IDLE DID VOD * CH 14 - IDLE DID VOD *
CH 15 - IDLE DID VOD * CH 16 - IDLE DID VOD *
CH 17 - IDLE DID VOD * CH 18 - IDLE DID VOD *
CH 19 - IDLE DID VOD * CH 20 - IDLE DID VOD *
CH 21 - IDLE DID VOD * CH 22 - IDLE DID VOD *
CH 23 - IDLE DID VOD * CH 24 - DCH 3

PRI* TRK LOOP 18 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE DID VOD * CH 02 - BUSY DID VOD *
CH 03 - BUSY DID VOD * CH 04 - BUSY DID VOD *
CH 05 - BUSY DID VOD * CH 06 - BUSY DID VOD *
CH 07 - BUSY DID VOD * CH 08 - IDLE DID VOD *
CH 09 - BUSY DID VOD * CH 10 - BUSY DID VOD *
CH 11 - IDLE DID VOD * CH 12 - BUSY DID VOD *
CH 13 - IDLE DID VOD * CH 14 - BUSY DID VOD *
CH 15 - IDLE DID VOD * CH 16 - IDLE DID VOD *
CH 17 - IDLE DID VOD * CH 18 - IDLE DID VOD *
CH 19 - IDLE DID VOD * CH 20 - IDLE DID VOD *
CH 21 - IDLE DID VOD * CH 22 - IDLE DID VOD *
CH 23 - IDLE DID VOD * CH 24 - DCH 18

PRI* TRK LOOP 19 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE DID VOD * CH 02 - IDLE DID VOD *
CH 03 - BUSY DID VOD * CH 04 - IDLE DID VOD *
CH 05 - BUSY DID VOD * CH 06 - IDLE DID VOD *
CH 07 - BUSY DID VOD * CH 08 - BUSY DID VOD *
CH 09 - IDLE DID VOD * CH 10 - BUSY DID VOD *
CH 11 - BUSY DID VOD * CH 12 - BUSY DID VOD *
CH 13 - IDLE DID VOD * CH 14 - BUSY DID VOD *
CH 15 - IDLE DID VOD * CH 16 - BUSY DID VOD *
CH 17 - BUSY DID VOD * CH 18 - IDLE DID VOD *
CH 19 - BUSY DID VOD * CH 20 - BUSY DID VOD *
CH 21 - BUSY DID VOD * CH 22 - BUSY DID VOD *
CH 23 - IDLE DID VOD * CH 24 - BKUP DCH 19

PRI* TRK LOOP 28 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
TRACKING
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - BUSY DID VOD * CH 02 - BUSY DID VOD *
CH 03 - BUSY DID VOD * CH 04 - BUSY DID VOD *
CH 05 - IDLE DID VOD * CH 06 - IDLE DID VOD *
CH 07 - IDLE DID VOD * CH 08 - IDLE DID VOD *
CH 09 - IDLE DID VOD * CH 10 - IDLE DID VOD *
CH 11 - IDLE DID VOD * CH 12 - IDLE DID VOD *
CH 13 - IDLE DID VOD * CH 14 - IDLE DID VOD *
CH 15 - IDLE DID VOD * CH 16 - IDLE DID VOD *
CH 17 - IDLE DID VOD * CH 18 - IDLE DID VOD *
CH 19 - IDLE DID VOD * CH 20 - IDLE DID VOD *
CH 21 - IDLE DID VOD * CH 22 - IDLE DID VOD *
CH 23 - IDLE DID VOD * CH 24 - DCH 28

PRI* TRK LOOP 29 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE DID VOD * CH 02 - IDLE DID VOD *
CH 03 - IDLE DID VOD * CH 04 - IDLE DID VOD *
CH 05 - IDLE DID VOD * CH 06 - IDLE DID VOD *
CH 07 - IDLE DID VOD * CH 08 - IDLE DID VOD *
CH 09 - IDLE DID VOD * CH 10 - IDLE DID VOD *
CH 11 - IDLE DID VOD * CH 12 - IDLE DID VOD *
CH 13 - IDLE DID VOD * CH 14 - IDLE DID VOD *
CH 15 - IDLE DID VOD * CH 16 - IDLE DID VOD *
CH 17 - IDLE DID VOD * CH 18 - IDLE DID VOD *
CH 19 - IDLE DID VOD * CH 20 - IDLE DID VOD *
CH 21 - IDLE DID VOD * CH 22 - IDLE DID VOD *
CH 23 - IDLE DID VOD * CH 24 - BKUP DCH 29

PRI* TRK LOOP 30 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE DID 3VCE * CH 02 - IDLE DID 3VCE *
CH 03 - IDLE DID 3VCE * CH 04 - IDLE DID 3VCE *
CH 05 - IDLE DID 3VCE * CH 06 - IDLE DID 3VCE *
CH 07 - IDLE DID 3VCE * CH 08 - IDLE DID 3VCE *
CH 09 - IDLE DID 3VCE * CH 10 - IDLE DID 3VCE *
CH 11 - IDLE DID 3VCE * CH 12 - IDLE DID 3VCE *
CH 13 - IDLE DID 3VCE * CH 14 - BUSY DID 3VCE *
CH 15 - IDLE DID 3VCE * CH 16 - IDLE DID 3VCE *
CH 17 - IDLE DID 3VCE * CH 18 - IDLE DID 3VCE *
CH 19 - IDLE DID 3VCE * CH 20 - IDLE DID 3VCE *
CH 21 - IDLE DID 3VCE * CH 22 - IDLE DID 3VCE *
CH 23 - IDLE DID 3VCE * CH 24 - DCH 30

PRI* TRK LOOP 31 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE DID 3VCE * CH 02 - IDLE DID 3VCE *
CH 03 - BUSY DID 3VCE * CH 04 - IDLE DID 3VCE *
CH 05 - IDLE DID 3VCE * CH 06 - IDLE DID 3VCE *
CH 07 - IDLE DID 3VCE * CH 08 - IDLE DID 3VCE *
CH 09 - IDLE DID 3VCE * CH 10 - IDLE DID 3VCE *
CH 11 - IDLE DID 3VCE * CH 12 - IDLE DID 3VCE *
CH 13 - IDLE DID 3VCE * CH 14 - IDLE DID 3VCE *
CH 15 - IDLE DID 3VCE * CH 16 - IDLE DID 3VCE *
CH 17 - IDLE DID 3VCE * CH 18 - IDLE DID 3VCE *
CH 19 - BUSY DID 3VCE * CH 20 - BUSY DID 3VCE *
CH 21 - BUSY DID 3VCE * CH 22 - BUSY DID 3VCE *
CH 23 - BUSY DID 3VCE * CH 24 - BKUP DCH 31
 
Sort by date Sort by votes
I assume 13 and 14 are the two you are disconnecting? If so, in light of you possibly not knowing what may be on those circuits, I would disable them for a few days to a week before disconnecting if possible. That way, you can always enable them to fix a potential issue that may come up, then figure out how to reroute before you turn them down again.
Make all the test calls you can think of, both inbound and outbound to make sure all is still working. Local and LD and any toll free inbound you may have as well as random DID numbers.
The numbers of each of the loops represents a slot in the main cabinets, most installers will label if they are not already labelled, so you should be able to see where they are. These two circuits should have red lights on them to show you which they are.
One thing to check, is to make sure that these two circuits are not providing timing for your PBX. You can do this in LD 60. (SSCK 0 or 1)
Eventaully you may want to remove the loops completely, but this is a good start for now.
 
Upvote 0 Downvote
Actually the Circuits are labeled loop 28 / 29. I totally understant the disable.What i am confused on is the Loop. if each loop represents a circuit or a tie then i have 10 total 3 being tie 7 being PRI. Is each PRI assigned a specfic loop? so if i disconnect the PRI the loop will show dsbl correc? Thanks
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Shivrohi
  • Locked
  • Question
DCH and Loop Association
Replies
5
Views
346
Shivrohi
Shivrohi
ItTevGar
  • Locked
  • Question
Message IVD 000 OUT 00000004 0000FF65 loop
Replies
3
Views
219
Firebird Scrambler
Firebird Scrambler
trmg
  • Locked
  • Question
Yet Another Post About Loop Start Disconnect Supervision
Replies
10
Views
255
trmg
trmg
SherWat
  • Locked
  • Question
NT8K14AK Trunk Card - open loop?
Replies
0
Views
85
SherWat
SherWat
dogg1
  • Locked
  • Question
Can a virtual loop be segmented?
Replies
3
Views
124
dogg1
dogg1

Part and Inventory Search

Sponsor

Back
Top