Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Looking for a "how to config your WAN/LAN" article online

Status
Not open for further replies.
pbxphoneman

pbxphoneman

Technical User
Oct 4, 2002
104
I have a LAN at the house which runs fine...however I'm installing another PC which is down the road and needs to be hooked into my home lan.I installed a point to point T1 between the 2 houses .The answers I'm looking for is how to config the routers between the 2 sites.The info that came with the used routers is totally worthless (Openroute GTX1000's) I would like to find something on the net that shows a typical point to point WAN setup..ie IP addressing..whether to use RIP or not...DHCP or static...etc.I'm looking to hook up one or maybe 2 PC's at the remote location (other side of the T) in order to access my DSLmodem via my LAN.
Anyone have any URL links on this stuff?
thanks
Todd
 
Status
Not open for further replies.

Similar threads

bfordz
  • Locked
  • Question
VLAN for 3CX phone system connected to Cisco catalyst 2960x, Watchguard M370 for DHCP
Replies
0
Views
152
bfordz
bfordz
Tamil India
  • Locked
  • Question
NEC SV9100 to NEC SV9100 PRI Interconneting
Replies
0
Views
198
Tamil India
Tamil India
It wire techs
  • Locked
  • Question
Vlans between an Edgemark 4700 series and Unifi US-24-250W Managed switch
Replies
0
Views
182
It wire techs
It wire techs
CurtCopeland
  • Locked
  • Question
C# camera SDK for motion detection
Replies
0
Views
136
CurtCopeland
CurtCopeland
Rickimaru
  • Locked
  • Question
Configuration issues Cisco UC560 Connected to 3com 4500 switch and Sonicwall Firewall
Replies
0
Views
145
Rickimaru
Rickimaru

Part and Inventory Search

Sponsor

Back
Top