A client of mine has a Nortel Norstar system.
It identifies as: SP: 30AGK07 NAT
which decodes to:
AG = CICS 2.0 EXPANDED (8X16/24) J05, K01, K07, K11, K12
All well and good.
But he would like to start using a CallPilot, and that apparently needs CICS 4 or later.
Somebody recommended a BCM 50 to replace this.
He's currently using a bunch of M7310 phones, and it would be nice to keep using those.
We don't know this stuff anywhere near well enough to try and:
- order the right components
- remove the old stuff
- install the new stuff
in a way that is "safe" for business continuity
I have been looking for an installer who is not too far away, and I'm not finding anybody. I may not be looking in the right places.
So I figure I should has here...
Thoughts/recommendations?
H
It identifies as: SP: 30AGK07 NAT
which decodes to:
AG = CICS 2.0 EXPANDED (8X16/24) J05, K01, K07, K11, K12
All well and good.
But he would like to start using a CallPilot, and that apparently needs CICS 4 or later.
Somebody recommended a BCM 50 to replace this.
He's currently using a bunch of M7310 phones, and it would be nice to keep using those.
We don't know this stuff anywhere near well enough to try and:
- order the right components
- remove the old stuff
- install the new stuff
in a way that is "safe" for business continuity
I have been looking for an installer who is not too far away, and I'm not finding anybody. I may not be looking in the right places.
So I figure I should has here...
Thoughts/recommendations?
H
