This a HP 2200DT printer attached to a local workstation running Windows 98SE by a USB cable. This workstation uses TS over a VPN to use an accounting program several miles away. Locally the workstation prints with little or no delay. However, within TS, there is about a 15-20 second delay. In fact, just going to the printer properties is very slow when using TS. All the printers on the network setup over network with IP addresses will print with no delay from this workstation. When looking at the ports tab under properties, it shows the port as the printers network network address (\\desktop\printer) rather than the USB port. Also the printer shows up with every TS user not just ones that add it. Does anyone know what may be causing this delay? Thanks