Logical Huntgroup Question

[NaLogo]

Hi there,

CCm 5.1(3)/ Ciscos 7941/61
i need a solution for following Problem:

If someone (external) calls the DN 100 (Cisco 7941), after 5 seconds, if no answer, the DN 200 (Cisco 7961) and 300 (Cisco 7941) should _also_ ring.

Means first only Dn 100 rings, after 5 seconds all three DN should ring.

I can't find an entry to this problem.

Thanks in advanced,
Michael

 

[pndscm]

Try a Broadcast Hunt group. Have DN 100 CFNA to the Pilot of a Broadcast Hunt Group that contains the Line Group that has the DN200 and 300 in it. Not sure if you can put the DN100 in the Broadcast group but you might be able to do it.

 

[bigchiefdan]

I have an after hours dn setup that does the broadcast hunt and it works great.
I have about 15 phones setup in the group, but I do not know if there is a limit.