Logging POTS calls on Cisco 837 adsl???

[directlyconnected]

Is it possible to log any phone call info on my adsl router (Cisco 837)? I know nothing about VoIP, if that would even be involved. Thanks.

 

[KiscoKid]

If you want to see the current state of calls, use the 'show pots csm' command.

There is a similar debug command available: 'debug pots csm'

I've never run this debug but I'd presume this will generate some logs for you related to incoming POTS calls.

 

[directlyconnected]

Says unrecognized command. It's not set up as VoIP config---only as adsl. These are all the available show commands, without any other words (sh ?)...

?
aaa Show AAA values
access-expression List access expression
access-lists List access lists
accounting Accounting data for active sessions
adjacency Adjacent nodes
aliases Display alias commands
alignment Show alignment information
archive Archive of the running configuration information
arp ARP table
async Information on terminal lines used as router interfaces
atm ATM information
audit Router Audit
auto Show Automation Template
backup Backup status
bgp BGP information
bridge Bridge Forwarding/Filtering Database [verbose]
buffers Buffer pool statistics
call Show call
caller Display information about dialup connections
cca CCA information
cdp CDP information
cef Cisco Express Forwarding
class-map Show QoS Class Map
clock Display the system clock
cns CNS agents
compress Show compression statistics
configuration Contents of Non-Volatile memory
controllers Interface controller status
cops COPS information
crypto Encryption module
dampening Display dampening information
debugging State of each debugging option
derived-config Derived operating configuration
dhcp Dynamic Host Configuration Protocol status
dialer Dialer parameters and statistics
dnsix Shows Dnsix/DMDP information
dot1x IEEE 802.1X
dsl DSL Show Commands
eou EAPoUDP
event-manager Event manager information
exception exception information
file Show filesystem information
flash: display information about flash: file system
flow-sampler Display the flow samplers configured
glbp GLBP information
hardware Hardware specific information
history Display the session command history
hosts IP domain-name, lookup style, nameservers, and host
table
html HTML helper commands
idb List of Interface Descriptor Blocks
interfaces Interface status and configuration
inventory Show the physical inventory
ip IP information
ipv6 IPv6 information
key Key information
kron Kron Subsystem
l2tun Layer 2 tunnel information
line TTY line information
llc2 IBM LLC2 circuit information
location Display the system location
logging Show the contents of logging buffers
login Display Secure Login Configurations and State
memory Memory statistics
modemcap Show Modem Capabilities database
monitor Monitoring different system events
ntp Network time protocol
parser Display parser information
policy-manager Policy Manager
policy-map Show QoS Policy Map
ppp PPP parameters and statistics
pppatm PPP over ATM
pppoe PPPoE information
privilege Show current privilege level
processes Active process statistics
protocols Active network routing protocols
queue Show queue contents
queueing Show queueing configuration
radius Shows radius information
random-detect-group display random-detect group
region Region Manager Status
registry Function registry information
reload Scheduled reload information
rhosts Remote-host+user equivalences
route-map route-map information
rtr Service Assurance Agent (SAA)
running-config Current operating configuration
sessions Information about Telnet connections
smf Software MAC filter
snapshot Snapshot parameters and statistics
snmp snmp statistics
sntp Simple network time protocol
spanning-tree Spanning tree topology
ssh Status of SSH server connections
ssl Show SSL command
sss SSS Information
stacks Process stack utilization
standby Hot Standby Router Protocol (HSRP) information
startup-config Contents of startup configuration
subscriber-policy Subscriber policy
subsys Show subsystem information
table-map Show Table Map
tacacs Shows tacacs+ server statistics
tcp Status of TCP connections
tech-support Show system information for Tech-Support
template Template information
terminal Display terminal configuration parameters
time-range Time range
track Tracking information
users Display information about terminal lines
version System hardware and software status
vpdn VPDN information
vrrp VRRP information
vtemplate Virtual Template interface information
webflash: display information about webflash: file system
whoami Info on current tty line

Thanks.