Logging into QSDI card with RS232 Nortel specific cable 1

[newguyintown]

Hi

I was on the forum not long ago with this very same issue. Thanks to all who responded. I still have the original problem where as I cant log into any of my 3 QSDI ports using 9 pin to 9 pin RS232 Nortel spec pinout.

I am using XP (Proffessional) on the PC`s in question, all 5 pC`s used to work but now cant use any of them.

I cant even get the PC to log into the CPS port.

I have tried all what was suggested from the forum. I am running out of options really, so if anyone has anything that I could try I would be so grateful. Thanks

 

[SL1M1]

Your QSDI ports maybe disabled?
Try LD 37
.STAT TTY
.ENL TTY x (Enables)

Cheers!!

 

[johnpoole]

did you replace the card?

john poole
bellsouth business
columbia,sc

 

[TAnselm]

Option 11's in particular are very sensitive about baud rate. I find that when I connect to 61's and 81's using procomm, I can use auto-baud rate but on 11's I have to specify exact baud rate.

 

[johnpoole]

since it's a qsdi, it's not an 11

john poole
bellsouth business
columbia,sc

 

[TAnselm]

Duh....

Thanks for slapping me upside the head John...

Guess I need to learn to engage brain before mouth (or in this case fingers)