Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Log ext off and log new ext in 5330 tels
- Thread starter merlin215
- Start date
Firebird Scrambler
Systems Engineer
You might want to access the phone system and go onto overlay LD 57 and print off the FFC codes.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
- Thread starter
- #3
Thx Firebird as I posted this in the wrong place . A Mitel question as I hit the wrong URL .....
I appreciate the answer !
Mitel 3300
FYI : I already printed them out but it does not show the codes to move/add/change ext hardware hence my post ! I can add a new device but I don't know how to change that device ( log it off ) . !
I appreciate the answer !
Mitel 3300
FYI : I already printed them out but it does not show the codes to move/add/change ext hardware hence my post ! I can add a new device but I don't know how to change that device ( log it off ) . !
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question