Location of DECT handset by Base Station

[luvarne]

Anybody knows the command for locating the DECT handset to which base station is it connected?

So far, I only know the DIS-SLCBPAC,DATA,LTU,SLOT,PORT; which only gives the SLC but not the base station (0 to 15) of that SLC.

So frustrating...

 

[donb01]

I'm speaking of a completely different system here, but I have Spectralink, and in spectralink if you go into the system status for the devices, if there is a call in progress on a devoce it will tell you want base station it is connected to, and if you go into the base station it will tell you which phones have active calls on it. I don't know if there is anything similar in this case - if there is any utility that lets you look at the base stations status and you can see how many calls are in progress, etc, or if when the phone is in use it will tell you where it is connected. I doubt SDSI will tell you that - it only tells you READY/BUSY. If there was some of utility you could use like an ISDN trace on a PRI or something where you can see the call data that might be a possibility. I've never done any wireless in the 4K environment and we didn't cover any wireless topics in any of the service courses I took - I would guess that would be a separate class if there is one.


Don Bruechert, Voice Comm Analyst II
CareTech Solutions @ Holy Family Memorial
Manitowoc, WI, USA