Local LAN access for vpn client

[macfoxx]

Hi
I try to find how to enable "local LAN access" for software VPN clients but on Cisco site I can't. I enable this function in client but when I'm connected by VPN I don't have access to any resourec on my local lan. what I need to change in my PIX 506 configuration? Thanks for any help.
Regards
Mac

 

[fdurham]

macfoxx-

Post your config, so we can see and help you out.

Frank

 

[macfoxx]

Thanks Fdurham for your response but I temporary resolved problem. I made split tunnel in configuration and I permit only access to lan 192.168.0.0 on pix and deny to others, before vpn client had access to 0.0.0.0 lan and that's why all request on remote computer was sent to tunnel, now only traffic to 192.168.0.0 is going to tunnel but statistic in VPN client still shows "Local LAN : disabled" If you find other way to change it leave your message.
Regars
Mac