I have a PRI/2CE1u card in a 2620. I have been having a lot of trouble getting it to work with an aggregate bearer (10 x leased lines on one interface). BT inssist the line is ok and I am pretty sure my config is ok. My understanding of the 'Local Alarm' LED on the controller means that no line is connected. Any thoughts? I am using a 'cab-e1-db15' cable to connect to the x21 NTU. But I have my suspicions that BT have terminated on the BNC (but claim it is on the x21). Please help if you know anything this job has gone on long enough.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Local alarm on E1 interface.
- Thread starter alfa156
- Start date
Similar threads
- Locked
- Question
- Locked
- Question