kunz12
MIS
- Jan 17, 2007
- 42
Hi everyone -
I have a question on how to implement load balancing between cisco routers. Here's the situation. We have a stack of 3750 switches connected to a 3845 router with dual T3's. This router will be connected to a MPLS cloud.
How can I implement load balancing between dual T3's in the same router?
A month later, we will be adding a second 3845 and will be moving the second T3 WIC and line to that router. Once that happens, how should we implement load balancing between routers then?
Somone suggested that we use OSPF between the 3750 stack and the routers. But not sure how that would implement load balancing.
The 3750 stack will have a couple of VLAN's connected to it, and also as ASA firewall that routes traffic to the Internet.
Your help would be greatly appreciated!
I have a question on how to implement load balancing between cisco routers. Here's the situation. We have a stack of 3750 switches connected to a 3845 router with dual T3's. This router will be connected to a MPLS cloud.
How can I implement load balancing between dual T3's in the same router?
A month later, we will be adding a second 3845 and will be moving the second T3 WIC and line to that router. Once that happens, how should we implement load balancing between routers then?
Somone suggested that we use OSPF between the 3750 stack and the routers. But not sure how that would implement load balancing.
The 3750 stack will have a couple of VLAN's connected to it, and also as ASA firewall that routes traffic to the Internet.
Your help would be greatly appreciated!