Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

LNR with forced auth code question..

Status
Not open for further replies.
arcopress

arcopress

Technical User
Jan 21, 2004
4
US
I've got an opt 11 with forced 3 digit auth codes in place w/ my LD carrier (Conversent).. When invoking LNRedial after completing the first call (or a busy), I get a retrain from the PBX ... I assume that's because it's shipping out the entire string INCLUDING the 3 digits at the end. Any suggestions other than manually dialing again? I thought about doing a strip and insert, but both local (no auth code needed) and LD go out the same route.. even id they didn't, the strip would cause Conversent to not see the auth code..
Thanks.
Alan
 
Status
Not open for further replies.

Similar threads

SherWat
  • Locked
  • Question
Clocking question 1
Replies
7
Views
1K
bignose21
bignose21
Emara
  • Locked
  • Question
when dialing the access code and th
Replies
1
Views
312
Firebird Scrambler
Firebird Scrambler
Mokpokpo Agbovon
  • Locked
  • Question
Replace M2250 Consoles with 3904 Digital Sets
Replies
5
Views
654
gbtac3
gbtac3
Sah219
  • Locked
  • Question
Add 3ed network group with intergroup switch 81c
Replies
0
Views
235
Sah219
Sah219
BSmith01
  • Locked
  • Question
IOD332 11 2 Error code.
Replies
0
Views
149
BSmith01
BSmith01

Part and Inventory Search

Sponsor

Back
Top