LMI / LMX Cards

[goland]

Hi All, Sorry to drag this one on but I can't seem to get the analog card in the mini carrier enabled.
I am still having trouble with the connection ports in the back.
Anyone have any experience with mini carriers and analog cards.
Is there any programming to be done on the mini carrier end.
I just have the card sitting in the 3rd slot and then I put the LMX card in the 61c and programmed a set of the analog card in 20 0 2 0 but it still gives me NPR326 cant see remote card..
Thanks alot
a tired man

 

[johnpoole]

have put analog cards in that system without problem, when you installed the additional lmi/lmx pair did you check switch setting on the cards in your switch? they did have a setting to est their place in line. they are also cables from the rear of your switch that need to be changed

john poole
bellsouth business
columbia,sc

 

[goland]

Hi John,
I put the Local Mini Carrier EXT card(NT5D69CA) into the 61c in the 20 0 2 and 20 0 3 slots which is after the Local Mini Carrier I/F (NT5D68CA) in slots 20 0 0 and 20 0 1 of the 61 c.
In the back I connected a cable set 50 pin amphenol from B to D the second of the 2 line card slots cards (thinking 20 0 2 would be C and 20 0 3 would be D)
The switch settings are all offwhich is what it said for the first LMX card.
Sound OK ???
Thanks for your input on this.
Wyles