Live 'Alarms' output

[PaulMcGuinness]

Hi everyone,

Can anyone tell me if (and how) you can get 'live' alarms out of the MD110 via either direct IP polling or SNMP traps?

Alternatively, are they available via a serial interface?

Many thanks,

Paul

 

[fouesnant]

Hi

Manly you could have different ways to report alarms from system:
ALAPI command give you the possibility to sort out alarm on a port that you have select (V24 or IP).
However, for IP, you should maintain the ip session open, or you will loose the informations when the channel close due to time out.

Otherwise for SNMP you should use an ALU board that send SNMP trap

Best regards

 

[ceejay55]

You can use Winfiol and Telnet and be connected to lots of sites permanently.Winfiol can be set up to send command when it gets back "Time out warning " and then you set it up to send sms ,sound alarm on pc etc if it receives alarm text.Basically cheap (free) version of EVM

 

[PaulMcGuinness]

Could someone detail how the ALAPI command works please? I am a complete MD110 novice!

Many thanks,

Paul

 

[lalrl]

Otherwise for SNMP you should use an ALU board that send SNMP trap"

You mean: AAU-Board

 

[whosrdaddy]

to initiate spontenaous printout for ALL alarms on an iodev:

ALAPI:IODEV=X,CLA=0&&4;

to check your iodev's: IODDP;

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[PaulMcGuinness]

Many thanks guys - Much appreciated.

Regards,

Paul