Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

listing dsbl phones

Status
Not open for further replies.

synergy08

Technical User
Mar 31, 2008
38
US
Does anyone recall the command to list out all disabled phones on a system? Also is there a command to enable all disbaled phones at once?
 
LD 32

Large System
LBSY l s List TNs of all busy units on specified shelf
LDIS l s List TNs of all disabled units on specified shelf
LIDL l s List TNs of all idle units on specified shelf

Small System
LBSY m List TNs of all busy units in specified module
LDIS m List TNs of all disabled units in specified module
LIDL m List TNs of all idle units in specified module
LMNT m List TNs of all maintenance busy units in specified module

You can't enable all disabled units with 1 command. You can enable all disabled units on a card with ENLC lll s c


Marc D.

If Bill Gates had a nickel for every time Windows crashed... Oh wait, he does...
 
You enable all TNs on an IPE Shelf with ENLS (loop) (shelf) ; or enable all Option 11 TNs on a Shelf with ENLS (cabinet number)

ENLS 0 0 (Loop 0, Shelf 0)
ENLS 0 (Cabinet 0)

--
Nortel Resources at GHTROUT.com
--
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top