list unused directory numbers

[rflores]

I have release 18 Option 11, ludn does not work in load 20. Can anyone help?

 

[hawks]

Don't think it was available on RLS 18.

 

[wdhb]

Think it does work but you have to be in LD20 or LD21

 

[DDionne]

LUDN can only be used in Rls 19 or higher.

DD

 

[coniglio]

unfortunately you need to run a DNB and look for gaps. If you want an unused ext that starts with a particular digit ("2" for example) do REQ PRT TYPE DNB CUST 0 DN 2 then just return thru everything else. If it skips an ext that is an unused DN.

200
201
202
204
205
208

in this scenario 203, 206 and 207 are unused. good luck!

 

[rflores]

Thank you everyone for the help, I did find out later in the day that I could do a PRT->TNB and look for gaps in number range in LD20. Thank you again for the help.