LIst of all digital phone extensions and what blocks they punch down to

[jjohnston7]

Is there a way to get a list of every digital phone, or multiset phone, or list of phones between an extension range and show where they punch down to (cabnet, shelf, slot, etc.)

I've been doing one at a time, but with over 1,000 to do it would be nice to just get a full list with a simple command...

 

[Lundah]

On what system?

 

[jpruder]

I'll answer that yes there is most likely a way to get this info

 

[AH64Armament]

It depends on what system it is...
If you're looking at a 3300 the form to export is User and Device attributes.

If you're looking at an SX2000, you will need to print the following forms: Multiline Set Assignment and Single Line Set assignment

If you can do this via ProComm or other terminal program, you can save them as a file instead of printing to paper...
the command is:
FOrmprint <form name> /ALL /PORT LPR3
ENable Print /Nonqueued

I've attached the Tech Handbook for the SX-2000.

If your system is an SX-200, you will need to use form 31 or 32 (can't recall which) to print out form 9. By default this will sent it via the printer port on the system... where you can connect a PC directly to it and with ProComm, you can capture the data.