List available extensions Ammo/ Openscape Assistant

[NYPQ-EN]

Good afternoon to all ,

We have extentions that are routed to HiPath4000 via WABE and are available to be reused at a later date.

In AMMO, how can I list what extensions/stations have been routed and are available to be used?

If I have to create a phone or even a phantom line, I need to be able to search for an available extension/station that I can use.

How can I list these available extensions via Ammo and also Openscape Assistant?

Thanks,

Eric

 

[Moriendi]

From AMO you want
dis-wabe:gen,,,,stn;
to list your configured stations.

You will see something like this

------------------------------------------------------------------------------
| DIGIT INTERPRETATION                   VALID FOR ALL DIAL PLANS            |
------------------------------------------------------------------------------
|                 |    CALL PROGRESS STATE     |NODE/DIGIT| RESERVED/CONVERT |
|      CODE       |            1 11111 11112 22| ANALYSIS | DNI/ADD-INFO/UFIP|
|                 |0 12345 67890 12345 67890 12|  RESULT  | *=OWN NODE       |
------------------------------------------------------------------------------
|   1123          |. .**** ***** **... ..... .*| STN      | [b]R[/b]                |
|                 |                            |          |[b]DESTNO   0[/b]        |
|                 |                            |          |DNNO    1-  1-200*|

If you see an R for Reserved - the number is configured as a station but not used, i.e, it's free for use.
If you don't see an R but do see DESTNO 0 - it's configured as a station on this 4K, and it is in use.
If you don't see an R but do see DESTNO <something else>, then it's configured as a remote station, i.e, configured on some other node and this 4K will try to ring it.