Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Linux commands on HP DL360 G7 (running CM 6.3) for determining hardware specifications

Status
Not open for further replies.

kulabird

Technical User
Jan 13, 2010
48
US
Greetings!

I have a core duplex CM 6.3 on HP DL360 G7's and an ESS duplex CM 6.3 on HP DL360 G7's. Currently none of the CM servers are running AVP. We would like to repurpose the ESS servers for Session Manager 6.3 and any other virtual servers I can cram on it. Has anyone run into this before and do you know of the Linux commands to determine CPU and other hardware specs. Note, 'lscpu' and other similar commands do not run on the current setup (bare metal server, hypervisor, and virtual CM server) at the CLI.

Thanks!
 
dmidecode in dom0 of system platform.

be forewarned: servers ordered from avaya @r6 are typically spec'd for the application they're to run. to say, dont expect more than a quad core + 8gb ram on a cm box
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top