We have Linksys WAP 200 setup as Access point and another Linksys access point set to repeat the WAP200, MAC address of repeater is entered into the WAP200 config. WAP 200 has been setup with a static ip on the network.
Windows XP clients work fine connect and get a IP from the windows 2003 server.
Windows Vista clients detects the wireless but never get an ip! Put in a static IP and all is well. But need to use DHCP!
There is no new firmware available for the device.
Any ideas?
Windows XP clients work fine connect and get a IP from the windows 2003 server.
Windows Vista clients detects the wireless but never get an ip! Put in a static IP and all is well. But need to use DHCP!
There is no new firmware available for the device.
Any ideas?