ryanak
IS-IT--Management
- Dec 5, 2008
- 50
I am using an RV042 firmware version 1.3.12.6-tm (newest available from Cisco/linksys website).
I am trying to connect clients via the Linksys Quickvpn utility. I am using QuickVPN version 1.2.11 (newest available from Cisco/linksys website) Every time I try to connect I recieve two errors
"The Server's certificate does not exist on your local machine. Do you want to quit this connection?"
at this screen i click No and it tries to continue forward. then i get the following error.
"Failed to establish a connection.
This could be caused by one of the following:
1. Incorrect password
2. no valid ip for the network card
3. incorrect server address
4. Windows Vista with Windows Firewall disabled, which disables IPSec service.
5. Local IP address conflicts with the subnet of the remote VPN Server."
on this second message
1. I have the correct password
2. my system has a good IP address
3. I have the correct server address
4. The Windows Vista Firewall is turned on
5. the IP addressing scheme is not going to conflict. the computer trying to vpn is on a 172.31.0.x address and the router is on a 10.10.10.x address.
I have copied the PEM file (certificate file) to the Linksys Quick VPN directory per instructions I found on multiple other forums.
I also followed the instructions found at
and performed the registry edit found at
what follows is the wget_error.txt
the IP address has been changed to 0.0.0.0 but I have confirmed that the one actually in the file is correct. I have also removed the username and password incorrect informaiton as we all understand the needs for security
wget_error.txt
"--06:04:34--
Connecting to 0.0.0.0:443... connected.
HTTP request sent, awaiting response... 404 Not found
06:05:34 ERROR 404: Not found."
Though i am currently testing this from a Windows Vista computer. the issue also exists on Windows XP computers.
any help would be GREATLY appreciated.
I am trying to connect clients via the Linksys Quickvpn utility. I am using QuickVPN version 1.2.11 (newest available from Cisco/linksys website) Every time I try to connect I recieve two errors
"The Server's certificate does not exist on your local machine. Do you want to quit this connection?"
at this screen i click No and it tries to continue forward. then i get the following error.
"Failed to establish a connection.
This could be caused by one of the following:
1. Incorrect password
2. no valid ip for the network card
3. incorrect server address
4. Windows Vista with Windows Firewall disabled, which disables IPSec service.
5. Local IP address conflicts with the subnet of the remote VPN Server."
on this second message
1. I have the correct password
2. my system has a good IP address
3. I have the correct server address
4. The Windows Vista Firewall is turned on
5. the IP addressing scheme is not going to conflict. the computer trying to vpn is on a 172.31.0.x address and the router is on a 10.10.10.x address.
I have copied the PEM file (certificate file) to the Linksys Quick VPN directory per instructions I found on multiple other forums.
I also followed the instructions found at
and performed the registry edit found at
what follows is the wget_error.txt
the IP address has been changed to 0.0.0.0 but I have confirmed that the one actually in the file is correct. I have also removed the username and password incorrect informaiton as we all understand the needs for security
wget_error.txt
"--06:04:34--
https://user:*password*@0.0.0.0/StartConnection.htm?version=1?IP=0.0.0.0?PASSWD=*password*?USER=user
=> `C://Program Files (x86)//Linksys//Linksys VPN Client//vpnserver.conf'Connecting to 0.0.0.0:443... connected.
HTTP request sent, awaiting response... 404 Not found
06:05:34 ERROR 404: Not found."
Though i am currently testing this from a Windows Vista computer. the issue also exists on Windows XP computers.
any help would be GREATLY appreciated.