Linksys BEFVP41 to WRV54g VPN

[telecomtekperson]

OK, I am trying to set up my first VPN.
There is 1 tunnel set up to a coworkers IP phone already. At our office we have the BEFVP41, port 3389 forwards to our IPphone system (so i guess that would be our endpoint).

I just got the WRV54g for my house. On the office (befvp41) I have to make a new tunnel. The first tunnel is set up to accept any ip and any gateway.

Where I am confused, is on the WRV, where do I input the info for the office site? I just need to have a tunnell so the ip phone will connect to the 3389 port.

 

[msworld]

1. the endpoint means the public IP of the office that should be the WAN IP on the BEFVP41.
2. in many cases, select any any as IP or gateway may not work.

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, VPN & Remote Access on

http://www.HowToNetworking.com

 

[telecomtekperson]

I have 1 tunnel set up in the office already for an existing user. Can both of us use the same tunnel at once? Or should I make another tunnel to my house?